Open Outlook.
Select Account Settings from the File Tab and click to Account Settings...
Select the Data Files Tab.
Click on the Add... button.
Name the Archive file, or leave the name as My Outlook Data File.pst and click OK.
Click the Close Button to complete the process.
The Archive will now be located below your Mailbox.
Creating Personal Folders to archive mail is a safe way to create a backup of mail and enables mail migration from one account to another.
Open Outlook
Select Tools from the toolbar, Click on Accounting Settings...
Click on the Data Files Tab
Select Office Outlook Personal Folders File (.pst)
Click OK
Change the "Save in:" location to a directory that is easier to find.
e.g. Local Disk (C:)
Change the "File name:" to a label that reflects the content.
e.g. UCONN_Biz_Mail
Click OK
Change the "Name:" to the file name specified in the previous step. This is especially important if you plan to create additional personal folders.
If you share the PC with others or would like to add a simple layer of security to the personal folder enter a password in the "Password:" box and enter the same password in the "Verify Password:" box.
Click OK
The personal folder will appear in Outlook's navigation pane in the "Mail Folders" section.
Right click on the new personal mail folder and choose New Folder...
It is best to create a new subfolder to separate Inbox mail from Sent items etc.
Type the folder name that contained the original file.
e.g. Inbox
Click OK
Repeat the "Create New Folder" process until subfolders for Inbox, and Sent Items have been created.
Highlight the mail items to move to the personal folder.
Here are two selection shortcuts:
It is possible to move mail which will remove it from the server and store it in the local personal folder OR the mail can be copied. Copied mail will remain on the server and will be available from the mail archive if needed and also available through Outlook Web Access. See Copying mail to a personal folder (recommended) or proceed to Moving mail to a personal folder (not recommended) below.
Highlight mail to copy (it is recommended ALL mail be copied, at once to avoid additional duplication and confusion)
Select Edit on the Outlook Toolbar.
Scroll to and click on Copy to Folder...
Select the newly created Inbox subfolder in the Personal Folder e.g. UCONN_BIZ_Mail.
Click OK.
Repeat the process until all mail has been copied to the appropriate subfolders, Inbox and Sent Items.
NOTE: It is recommended that only a small amount of mail be moved, or be VERY patient. Outlook may display a message that it is "Not Responding." The message indicates that Outlook is working to complete the task. It can take an extremely long time to move large mailboxes. DO NOT SHUTDOWN, OR CLOSE OUTLOOK DURING A MAIL MOVE...BE PATIENT.
Click and drag the mail from the INBOX to the newly created Personal Folder, subfolder "Inbox"
Repeat the process with the Sent Items.
Navigate to Start > Control Panel > Mail and choose "Data Files".
Under the "Data Files" tab hit "Add."
Choose "Office Outlook Personal Folders File (.pst)" and hit OK.
Name your Personal Folder file whatever you please, in this instance I chose "Email Archive," and Save in: My Documents > Outlook.
**NOTE: If you are using a computer with the School of Business image (most university assets) you can simply type "D:\Data\Outlook\Email Archive.pst" into the address bar.
Name your Personal Folder; this will be the actually name displayed in Outlook, and optionally you can create a password.
Open (or restart) Outlook. Your newly created Personal Folder should show up in the left hand pane under Mail. You can expand the archive by clicking the "+" and create folders within it like any other folder in your mailbox.
**NOTE: Email saved to a Personal Folder is removed from the mail server and stored onto your local machine. Therefore it is only accessable from that particular machine.
Creating Personal Folders to archive mail is a safe way to create a backup of mail and enables mail migration from one account to another.
Click on File on the Outlook Toolbar
Scroll to and select Import and Export...
Select Personal Folder File (.pst) and click Next
Choose the Folder to export.
If there are subfolders to export as well place a check in the Include subfolders box.
Click Next
In the "Save exported files as:" field specify a location that is easy to find. C:\ or Browse... to your desktop
Choose an from the Options the safest option is "Allow duplicate items to be created"
Click Finish
Change the "Name:" to the file name specified in the previous step. This is especially important if you plan to create additional personal folders.
If you share the PC with others or would like to add a simple layer of security to the personal folder enter a password in the "Password:" box and enter the same password in the "Verify Password:" box.
Click OK
A dialog box will display the progress of the backup.
Click each open Windows OK button to close it and repeat the entire process from Step1 for each Folder you wish to back up, renaming the Backup folder name in Step 4 for each new folder being backed up.
Creating Personal Folders to archive mail is a safe way to create a backup of mail and enables mail migration from one account to another.
Click on File on the Outlook Toolbar
Scroll to and select Import and Export...
Select Personal Folder File (.pst) and click Next
Choose the Folder to export.
If there are subfolders to export as well place a check in the Include subfolders box.
Click Next
In the "Save exported files a
Creating Personal Folders to archive mail is a safe way to create a backup of mail and enables mail migration from one account to another.
Click on File on the Outlook Toolbar
Scroll to and select Import and Export...
Select Personal Folder File (.pst) and click Next
Choose the Folder to export.
If there are subfolders to export as well place a check in the Include subfolders box.
Click Next
In the "Save exported files as:" field specify a location that is easy to find. C:\ or Browse... to your desktop
Choose an from the Options the safest option is "Allow duplicate items to be created"
Click Finish
Change the "Name:" to the file name specified in the previous step. This is especially important if you plan to create additional personal folders.
If you share the PC with others or would like to add a simple layer of security to the personal folder enter a password in the "Password:" box and enter the same password in the "Verify Password:" box.
Click OK
A dialog box will display the progress of the backup.
Click each open Windows OK button to close it and repeat the entire process from Step1 for each Folder you wish to back up, renaming the Backup folder name in Step 4 for each new folder being backed up.
s:" field specify a location that is easy to find. C:\ or Browse... to your desktop
Choose an from the Options the safest option is "Allow duplicate items to be created"
Click Finish
Change the "Name:" to the file name specified in the previous step. This is especially important if you plan to create additional personal folders.
If you share the PC with others or would like to add a simple layer of security to the personal folder enter a password in the "Password:" box and enter the same password in the "Verify Password:" box.
Click OK
A dialog box will display the progress of the backup.
Click each open Windows OK button to close it and repeat the entire process from Step1 for each Folder you wish to back up, renaming the Backup folder name in Step 4 for each new folder being backed up.
Select the Folder tab on the uppermost toolbar
Click the option New Calendar
Name the new calendar and choose a folder in which to save
The calendar becomes a secondary private calendar on its creator's email account. It will not be viewable by anyone else unless the user grants permission to it.
In the example above, the new private calendar is named "Broken Calendar" and it is grouped under the category "My Calendars"
Open Microsoft Outlook
On the Outlook tool bar click File.
Click Account Settings.
Select Account Settings...
Double click on the Exchange Server Account. E.G. john.dough@business.uconn.edu.
In the example above John.Dough@business.uconn.edu's mail is being delivered to a cache file (John.Dought.ost).
In the Example above Cached Exchange Mode is selected. This option prevents Outlook from fetching live data from the Calendar. If a person tasked with updating a group calendar, or the calendar owner, is operating with Cached Exchange Mode enabled his/her updates may not be applied to the calendar until Outlook is closed, opened, or the "F9" key is pressed. In Cached Exchange mode offline-file caches have to be forced to synchronize with the Exchange server.
Unselect "Use Cached Exchange Mode". This will automate calendar synchronization.
Click More Settings...
Click the Advanced tab.
Unselect Use Cached Exchange Mode.
Unselect Download shared folders.
Click OK.
Click Next.
Click Next.
Click Finish.
Close all calendars, emails and close Outlook.
Launch Outlook to fetch live data from the Exchange Server.
If a new employee is tasked with scheduling on a shared calendar share this information with them.
Open Outlook 2010
On the Navigator Pane click on Calendar
Right Click on your Calendar
Scroll to and select Share, then Share Calendar
Click To... and specify the users you'd like to share your calendar with
Select the option to Allow recipient to view your Calendar
In the Details: drop down box provide the permissions level desired:
NOTE: Private Items display only availability
The permissions will not apply until the end-users close all emails, calendars and outlook and restart Outlook or restart their PCs.
If you are interested troubleshooting permission problems or providing more or less calendar permissions please see Share Your Calendar (Complex)
To share your calendar in Outlook 2003, Outlook 2007, or Outlook 2010, complete the following:
Open Outlook
On the Navigator Pane click on Calendar
Right-click on your calendar and select Properties.
Click on the Permissions Tab
Click Add....
Type the last name of the person with whom you want to share your calendar. Or click Advanced Find to search the Global Address List
Select the name and click Add -> Repeat to add multiple names
Click OK
Select the first name from the list to define and apply permission. By default, the Permission Level is None (you will need to define permission for EACH person you have added to the list)
Select an appropriate level of consent from the Permission Level: drop-down menu
The permission levels are defined as:
Reviewer or Editor, are appropriate for allowing others to schedule and change appointments on your behalf.
Select the next person added above and repeat the steps to assign a permission level. Remember to apply grant and apply permission for each person you selected.
When you are done, click Apply and then click OK.
The permissions will not apply until the end-users close all emails, calendars and outlook and restart Outlook or restart their PCs.
Snow Leopard, Mac OS X natively supports Microsoft Exchange Server 2007 and later services such as email, calendar, and the Global Address List. Macintosh common applications: Mail, iCal, and Address Book connect directly to the exchange server permitting Snow Leopard users to send and receive Exchange messages and accept and decline meetings right from the iMail inbox. Other service include: accessing free/busy information
to schedule meetings and find contacts by searching the Global Address List.
In the recent past, Mac users had to connect to their School of Business email via IMAP. With the introduction of Mac OS 10.6 Snow Leopard, and native support for Exchange, there is no need to use IMAP. To utilize the full features offered by Exchange 2010, Windows users must use Outlook 2007 or Outlook 2010. Mac users must be running Mac OS10.6 Snow Leopard or later.
If for some reason a PC/Mac cannot be upgraded, IMAP may be the only means to connect (not supported).
Incoming Mail (IMAP) Server Requires TLS |
mail.business.uconn.edu |
Outgoing Mail (SMTP) Server Requires TLS |
mail.business.uconn.edu |
Account Name |
Your School of Business UserID. Usually first initial of first name and last name. Example: jdough |
Email Address |
Your email address (either firstname.lastname@business.uconn.edu or first initial of first name and last name ... |
Password |
Your School of Business Domain password |
Your Name: Enter your first and last name
Email address: Enter your current School of Business email address. It can be either firstname.lastname@business.uconn.edu or first initial of first name and last name with @business.uconn.edu appended. Example: jdough@business.uconn.edu
Server Information:
Account Type: IMAP
Incoming Mail Server: mail.business.uconn.edu
Outgoing Mail Server (SMTP): mail.business.uconn.edu
Incoming Server (IMAP): 143
Use the encryption type: TLS
Outgoing Server (SMTP): 587
Use the encryption type: TLS
Apple releases iOS 6.1.2 to fix Exchange calendar bugs
http://www.theverge.com/2013/2/19/4005406/apple-releases-ios-6-1-2-to-fix-exchange-calendar-bugs
Recently a syndicate of SPAMMERS has created bots that skim for email addresses loads them to a database then spoofs the sender's email address and applies it as the recipient address. The result is the recipient looks like the sender. This technique circumvents many SPAM filters and client based rules.
To resolve the issue we have asked users to create an email filter that compares the sender's email to the recipients email address. If the two are identical then the email is diverted to the junk folder.
The School of Business DOES NOT apply filtering at the server. All email filtering occurs by the email client (the software that connects to the School of Business Exchange Server).
As you appear to be a Mac user Apple Mail, your likely email client, would be responsible for running filters and removing unsolicited email (SPAM) from your accounts.
How to configure Microsoft Outlook to filter SPAM
http://helpspot.business.uconn.edu/index.php?pg=kb.page&id=184
Here are two links explaining how to configure rules in Apple Mail (unsupported)
http://www.makeuseof.com/tag/rules-mac-mail-control/
http://www.freeemailtutorials.com/appleMail/spamJunkMail.cwd
For more information about how the School of Business filters SPAM
http://helpspot.business.uconn.edu/index.php?pg=kb.page&id=299
Mail passes from the senders' mail servers to SPAMSoap which uses a Stacked Classification Framework spam detection system to filter mail.
Intercepts include but are not limited to:
Filtered email not considered spam is delivered to the Exchange Server. No filtering takes place on the Exchange Server and it is delivered to end-users' mailboxes.
Each users Outlook client runs end-user created rules to further analyze mail and sort it to a Junk Mail Folder or Deleted Items. Because these are end-user preferences Exchange Administrators have no ability to change user initiated rules.
You can block messages from a specific sender by adding the sender's e-mail address or domain name to the Blocked Senders List. Messages from addresses or domain names in this list are always treated as junk. Outlook moves any incoming message from senders in the Blocked Senders List to the Junk E-mail folder, regardless of the content of the message.
Mail that is screened by the Outlook mail client is diverted to a Junk E-mail folder or it can be sent to deleted items. It is important to purge these folders regularly especially if email quota space is at a premium.
To create a new Junk mail filter open your Outlook Inbox and right click on the mail item(s) you wish to filter.
Right click on the message and scroll to Add Sender to Blocked Senders List.
This will force all mail from that sender to the to the Junk E-mail folder.
Once added to the Blocked Senders List your PC will need to be running and Outlook will need to be running for the rule to be active. Or it will be run the next time you login to the PC and open Outlook. This is known as a "client-side rule" these filters will not work though Outlook Web Access https://mail.business.uconn.edu unless the PC that is running the rule is powered on, logged in and left in the "locked workstation mode" and has Outlook Running.
Right click on the mail message you want to create a Rule for.
Scroll to and select Create Rule...
In this example any email with a Subject containing {SPAM?} (which is inserted by the UITS email appliance) Sent to me only will be moved to the Junk E-mail folder
Select the options for your rule.
Open Microsoft Outlook
Go to the Inbox Screen
Select the "Junk E-mail" folder
A list of mail items will appear on the right preview pane.
Right click on each mail item that is not considered junk
Scroll to and select Junk E-mail
Scroll to and click on "Mark as Not Junk..."
Follow the prompts to confirm each sender you would like to continue to receive mail from.
All mail from that sender will now be directed to the inbox instead of Junk e-mail folder.
Mail that is screened by Outlook is diverted to a Junk E-mail folder. Mail that is filtered and identified as SPAM by SPAM SOAP is identified by a message sent to your mailbox from SPAM SOAP.
If mail is going to the Junk E-mail folder open your Junk E-mail folder. If you have moved the mail to a new folder, open that folder.
Right click on the message and scroll to Add Sender to Safe Senders List.
If mail from a specific domain is going to the Junk E-mail folder select the option to Add Sender's Domain (@example.com) to Safe Senders List. It is recommended that you use this option sparingly and avoid adding sender domains that are known to be havens for SPAMMERS such as Hotmail, Yahoo, and Gmail.
Once added to the Safe Senders List your Outlook will need to be open and running for the rule to be active. Known as a "client-side rule" these filters will not work though Outlook Web Access https://mail.business.uconn.edu unless the PC that is running the rule has Outlook Running.
1. Open your Spam Quarantine Report (in your email inbox, usually sent daily by reports@spamsoap.com)
2. Click on the link: View List of All Quarantined Messages (bottom-right)
3. A browser window will open with your complete message quarantine information. Click on "Allow/Deny" (top-right)
4. To have any address be set to automatically be ALLOWED (i.e. whitelist), simply type or copy the sender's email address into the "Add Entry" field under the section: Allow List. Then click on the "Add >>" button.
5. To have any address be set to automatically be DENIED (i.e. blacklist), simply type or copy the sender's email address into the "Add Entry" field under the section: Deny List. Then click on the "Add >>" button.
6. That is all that is necessary, you may now click on the Logout link at the top-right of the window.
Or
Call 866.SPAM.OUT (866.772.6762)
Provide the Agent with:
First name, last name, email address (full first name. last name @ business.uconn.edu)
And the Domain Name business.uconn.edu
Or complete the support webform http://www.spamsoap.com/support/
You may receive several spam reports every day. This is because you have multiple email aliases, and SpamSoap does not recognize all the different aliases belong to one account. For example, John Doe may have the following aliases: John.Doe@business.uconn.edu, jdoe@business.uconn.edu, and jdoe@sba.uconn.edu.
To find your different aliases, simply look in Outlook at the subject line for the Spam Quarantine Report. Below you will see an example of Quarantine Reports sent on the same day to 3 different aliases:
Rather than receive 3 or more separate spam quarantine reports every morning, you can set SpamSoap to send you 1 report with messages quarantined for all your aliases:
1. Open your Spam Quarantine Report (in your email inbox, usually sent daily by reports@spamsoap.com)
2. Click on the link: View List of All Quarantined Messages (bottom-right)
3. A browser window will open with your complete message quarantine information. Click on "Setup" (top-right)
4. Now click on "Aliases" (top-right)
5. Type or Copy your email alias into the field under "Add a User Alias..." Note that you will not need the "@business.uconn.edu" suffix of the address. Click on Add when you are done.
6. After you click add you will see this message:
7. This is because SpamSoap needs confirmation to add the alias to your account. Go to Outlook and find the message from Support@spamsoap.com titled "Alias Email Address Authorization."
8. Click on the link: I authorize this request.
9. A browser window will open and take you directly to the Aliases page, and you will see your new alias listed. You can now continue to add more aliases, or Logout.
Open a web browser and enter the URL: https://listserv.uconn.edu/
As is the case with most University websites, you must add a security certificate exception to your system to allow access.
Simply click Add Exception...
Select Get Certificate from the window that pops up, and then click Confirm
The left column of the page allows subscribers to manage subscriptions
Click on the hyperlink: "List Management"
If you know your password, please go Figure 7
If you have never managed email lists, then please proceed to Figure 3
If you have never used LIST SERV to subscribe you may have to use the "GET A NEW LISTSERV PASSWORD" hyperlink to create a new account.
Following the University's default email alias enter your full firstname dot lastname @ uconn.edu.
Create a new password, confirm the new password and click on the Register Password button
Moments later, you will get a confirmation email
Open the confirmation email and click on the URL provided
A window should pop up giving you the following confirmation message:
Enter the email address that is receiving listserv messages. In most cases School of Business users will have listserv messages forwarded from the UConn email address e.g. john.dough@uconn.edu. Not the School of Business account e.g. john.dough@business.uconn.edu.
Click on the "Subscriber's Corner" to see which lists are directed to your email address.
It is not advisable to remove subscriptions unless you are certain that the information does not pertain to you. If you do choose to unsubscribe from lists:
Click in the Checkbox to Select any list to delete
At the bottom of the list section select the dropdown box, scroll to and select "Unsubscribe"
Click the "Submit" button to remove the list(s) from your account.
Click on the "Subscriber's Corner" to see search for a list to subscribe to
Change the "Show All Lists:" Dropdown to "Show All Lists"
Type in the list you would like to add in the "Search for List:" field
Click the Search button
Click the Search button
Select the list(s) you would like to add
Click the Submit button.
You will receive an email confirmation that the list was added.
|
To learn more about UConn Lync, browse to http://lync.uconn.edu and see the School of Business Knowledge Book for Lync for specific details on how to use the tool with your School of Business accounts. The websites includes information explaining how to download, install, and configure UConn Lync. |
Additional information explaining how to use all of the services offered through UConn Lync can be found in the UConn Lync Guide for faculty and Staff.
To participate in a voice and/or video conference, you will need a microphone and/or webcam. All laptop-integrated webcams should be compatible with Lync. External webcams are usually much better and are the only option for desktop PC. The following products are recommended:
- Microsoft LifeCam Studio - 1080p* HD quality and is available through the UConn Co-op for $79.95. Installation software for this webcam is here.
- Microsoft LifeCam Cinema - 720p HD quality and is available through the UConn Co-op for $59.95. Installation software for this webcam is here.
- Logitech HD Pro Webcam C910 - Compatible with both PCs and Macs, 1080p* HD quality, and is available through the UConn Co-op for $89.95.
To participate in a web conference use the computer's microphone and speakers. For better results a good quality headset is recommended. Most vendors' headsets will work but there are some models designed for Lync, with integrated volume controls and other convenient features.
To get started, please see http://lync.uconn.edu
Your UConn Lync address is your default email address.
If you are not certain what your default email address is, and the format shown here does not work, you can double check by looking in Microsoft Outlook's title bar. Your default email address will show in the title bar.
When signing in to Lync, this is what you will type in to connect. By default, this would be in the format firstname.lastname@business.uconn.edu
Navigate to Add Account
Choose Exchange Active Sync (also just called "Exchange" in some cases)
When prompted, enter your:
Press Next
Select what you want to Sync
Press Finished
Please note: iPad, iPhone and iPadTouch will time out and will require you to enter mail.business.uconn.edu as the server address.
BlackBerry users will simply enter the autodiscover settings including: username (ending in @business.uconn.edu) and the password.
From the Home screen, tap the gray Application button
Tap Email
Tap Next
Add a New Account to your Android Phone (existing users can modify settings)
Using the keyboard, enter your:
Tap Next
Tap Exchange Account
Complete the following fields:
Tap Next
Select "Use secure connection SSL"
Select "Accept all SSL certificates"
Select "Accept all TLS Certificates"
Enter your desired Account options, and then tap Next
Enter an identifier for the account and the display name in Set up email
Tap Done
Currently the Android 2.2 Operating System does not support ActiveSync connectivity with Microsoft Exchange Service Pack 1. There are significant flaws in most vendors', implementation of Android 2.2 (Froyo) and some carriers, like Verizon have restricted ActiveSync use to all but the most expensive plans.
Verizon requires an unlimited email & web for smartphones plan to enable Corporate Sync account.
More plan details and limitations can be found here http://www.geek.com/articles/mobile/everything-you-need-to-know-about-the-droid-data-plans-and-exchange-email-20091110/
Currently Android 2.2 users are only able to receive emails using the IMAP settings described here. http://helpspot.business.uconn.edu/index.php?pg=kb.page&id=177
Email Address: first.last@biz.uconn.edu
Domain\username: biz.uconn.edu\first.last@biz.uconn.edu
Password: email password
Exchange Server: outlook.office365.com
Checking your School of Business email on a Blackberry using IMAP will allow you to keep the email on the server so you may check the same messages using an e-mail client, such as Microsoft Outlook on your office computer.
Select the option to "...provide the settings to add this email account"
Click on the Next button
Enter the following information:
Check "Use SSL" (if prompted).
Check "Use TLS" (If prompted).
Your UConn School of Business account should now be configured for your Blackberry device. (There may be some delay before the new account is pushed out to your Blackberry.)
Select Exchange:
From the home screen, choose "Settings", then "Mail, Contacts, Calendars", then "Add Account..."
You will see an Exchange option at the top of the list.
Complete basic information:
Select this option and you will be asked to provide your email address, Username and Password, and a description of the account.
Please Note: The Username field uses an example of Domain\User, however the name provided in this dialog should be simply your login name. If you have a newer iphone/ipad which requests the DOMAIN, please use business.uconn.edu
Fill in Server:
After completing all fields and clicking the 'next' option, the device will attempt to locate a server, however this process may not succeed. You may be asked to complete a similar dialog that now asks for your server address. This should be the mail.business.uconn.edu.
Select Services to synchronize:
Once the iPhone has confirmed connectivity with the School of Business Exchange cluster, you will be asked which type of folders to synchronize. By default Email, Contacts, and Calendars are selected.
Once you save this information, the device will begin to synchronize. You can go back into the account settings to configure additional options, such as the number of days for synchronization, or SSL. Note that SSL is the default option and is recommended.
Please note: The University and the School of Business do not support iPhones. The settings provided are RECOMMENDATIONS, users NOT the School of Business are responsible for these settings and are used at his/her own risk. School of Business Services Desk Technicians are not permitted to work on personal devices.
Before BeginningPlease Read |
Make note of this information from the School of Business Email Administrator:
|
Set Microsoft Exchange ActiveSync [EAS] as your account type.
The details to this setup can be found here (on page 203-204)
Server Name: https://mail.business.uconn.edu/owa
Domain: business
Username: jdough (Your current School of Business ID)
Password: xxxxxxx
To delete an existing Exchange account on your iOS device, please try the following:
This will completely remove your Exchange Account from your device, including E-mail, Contacts, and Calendar
On Start, flick left to the App list, tap Settings , and then tap Email + accounts.
Tap and hold the account you want to delete from your phone, tap Delete, and then tap Delete again.
You can remove an account to delete it and all information associated with it from your device, including email, contacts, settings, and so on.
Outlook 2010 has a feature where inserting a signature will over-write the existing signature, but it is possible to add multiple signatures, and set a default signature.
In Outlook 2010, click File > Options > Mail > Signature.
When the default signature is defined additional signatures may be added after an email is composed by selecting the Insert tab, click Signature in the Include group, and selecting the signatures to include.
Open Outlook 2010
On the Ribbon Bar click New Items, Click More Items, click Contact Group.
In the "Name:" Field enter a name for the new group.
Click Add Members .
Click From Outlook Contacts or select a different source from which to select email addresses.
Double Click on each name to add it to the "Members ->" field.
When all required members have been added click OK.
Click Save & Close to complete the list.
To upgrade your Outlook so it is in sync with the new mail server, or to configure Outlook for the first time, please follow the following instructions.
Open the Start Menu
Navigate to the Control Panel
Search for and click on Mail
If you are running Windows XP, the option for Mail should be visible in the Control Panel, so a search will not be necessary.
Select Show Profiles...
Click Add...
A window will appear asking you to Create New Profile. Enter in a name for your new profile (in this case, "Example" was chosen, but you can name it virtually anything you like)
Select OK
Verify that the information automatically entered is correct
Select Next
From here, Outlook will auto-configure the proper settings
When the configuration process has finished, you will receive a notification stating You must restart Outlook for these changes to take effect either as a pop-up window or as a written message in your configuration page.
Click OK on the pop-up.
Select Finish
Outlook will immediately open, and a message will appear in your taskbar like the one pictured above.
Important! You must close out of Outlook and then re-open it for these changes to take effect!
You should now be upgraded to the new mail server!
Note: Since this process requires you to make a new profile, any local archive folders will not be automatically added. For instructions on how to add these local folders back into your Outlook view, please see How to Add *.PST Archives.
Reopen Show Profiles... from the Mail option in Control Panel (using the same steps as before). This time, you will see two profiles instead of one (in this case, the two are "Example" and "Outlook").
Select Prompt for a profile to be used and click Apply and then OK
Now when you open Outlook, you can select which profile you want to load.
In the recent past, Mac users had to connect via IMAP. With the introduction of Mac OS 10.6 Snow Leopard and native support for Exchange there is no need to use IMAP. To utilize the full features offered by Exchange 2010 Windows users must use Outlook 2007 or Outlook 2010. Mac users must be running Mac OS10.6 Snow Leopard.
If for some reason a device cannot be upgraded, IMAP may be the only means to connect (unsupported).
Incoming Mail (IMAP) Server Requires TLS |
mail.business.uconn.edu |
Outgoing Mail (SMTP) Server Requires TLS |
mail.business.uconn.edu |
Account Name |
Your School of Business UserID. Usually first initial of first name and last name. Example: jdough |
Email Address |
Your email address (either firstname.lastname@business.uconn.edu or first initial of first name and last name... |
Password |
Your School of Business Domain password |
Your Name: Enter your first and last name
Email address: Enter your current School of Business email address. It can be either firstname.lastname@business.uconn.edu or first initial of first name and last name with @business.uconn.edu appended. Example: jdough@business.uconn.edu
Account Type: IMAP
Incoming Mail Server: mail.business.uconn.edu
Outgoing Mail Server (SMTP): mail.business.uconn.edu
Incoming Server (IMAP): 143
Use the encryption type: TLS
Outgoing Server (SMTP): 587
Use the encryption type: TLS
The Outgoing server requires authentication: Use same settings as incoming mail server
Outlook Favorites are found in the Outlook Navigation Pane. Favorites are shortcuts that refer to folders such as your Inbox, Sent Items. Additional folders or shortcuts to personal folders can also be added to make navigation easier.
If favorites are disappearing and reappearing between Outlook sessions please try the following command line
Start > Run and enter the text below, be sure to include the quotation marks
"C:\Program Files\Microsoft Office\Office14\outlook.exe" /resetnavpane
550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found ## In nearly all cases are caused from an invalid nickname cache entry.
This is such a common problem that Microsoft created a "Fix it" for the issue. Download and run this little app to fix the problem.
http://go.microsoft.com/?linkid=9759542
Outlook 2010
Open a new email message.
Type the first few letters of the suspected invalid address that you want to remove from the cache.
Highlight the entry that populates in the "suggested names" list by moving your mouse pointer over the name until it is highlighted. (Do not click the name).
When the "X" icon appears next to the highlighted name, click X to remove the name from the list.
With Outlook 2010 open, click File (BackStage), and then click Options.
Click the Mail tab.
Under Send Messages, click Empty Auto-Complete List.
Outlook will generate a new nickname cache.
Close Outlook, and any email or calendar windows that may be open.
Click Start, then click Run.
In the Run field type in Outlook.exe /CleanAutoCompleteCache
Press the Enter key
Outlook will open.
On the Outlook Ribbon Bar click Address Book
In Address Book preferences click in the Address Book dropdown and change the preferred address book from Suggested Contacts to Global Address List.
Error message when you try to open or save an e-mail attachment in Outlook: "Cannot create file." This is caused by a problem with the temporary Internet Files Folder
To resolve the issue run Microsoft Fix it 50673
Or Fix the problem manually:
Click My Computer, and then double-click drive C:\.
On the File menu, click New, and then click Folder.
Name the folder temp0.
Click Start, click Run, type regedit, and then click OK.
Browse the Registry for the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\
In the right pane, double-click OutlookSecureTempFolder.
In the Value Data field, type C:\temp0\ and then click OK.
Exit Registry Editor.
Restart the computer.
Click on the folder icon located on the bottom of the Outlook Navigation Pane
Move the Navigation pane scroll bar until the Public Folders section and visible.
Click on the icon to expand the public subfolders.
If the desired calendar or subfolder is not visible please send an email or use the HelpSpot request portal to request access. Please include the public folder/calendar name.
Open you're your web browser and go to https://mail.business.uconn.edu/owa
Please note: Access to any additional mailboxes is provided by the mailbox owner or by the email administrators for group/department mailboxes
Right click on your mailbox and select Open Other User's Inbox...
Click in the empty field if you know the mailbox name or Click on Name...
Enter the name of the mailbox to open and click on the search icon to locate the mailbox
Double click on the email address or select it and click OK
Click OK
The new mailbox will be added below your individual mailbox. The mailbox will remain in view until it is right clicked on and removed.
Email access is provided using Outlook Web Access (OWA). It is the only supported method for accessing your School of Business email from a non-UConn PC.
Click the following link: https://mail.business.uconn.edu/owa
Enter your School of Business user name.
Enter your password and click Sign In.
The OWA provides web browser access to email, contacts, global address lists, calendars, tasks, public folders (assuming you have already been granted permission) and other Outlook functions.
Here is a sample screen:
Open your web browser and go to https://mail.business.uconn.edu/owa
Click Options (Top Right Corner of Outlook Web Access)
Scroll to and select "Set Automatic Replies..."
Select the options shown above
Specify a Start day and time
Specify an End day and time
Create an Out of office message for internally and externally received mail
Click Save
By default, the spell checking option is turned off in Outlook Web Access (OWA). If you prefer to use the Firefox web browser instead of Internet Explorer, an integrated spell checker will underline suspected words. To use this integrated spell checker, right-click on any word underlined with a red indicator. Select the appropriate spelling from the list to replace the word.
If you prefer to enable the Outlook Web Access (OWA) spell checker (recommended for individuals using Internet Explorer), find and click on Options in the upper right-hand corner of the OWA window.
Select Settings from the list on the left of the window, and then Spelling from the tabs running across the top of the screen.
Check the box indicating Always check spelling before sending
Select the desired dictionary from the Use this dictionary to check spelling drop down menu
Click Save at the bottom of the page and return to My Mail (upper right-hand corner)
To verify that the settings saved, create a new email with spelling mistakes. Select the Spell Check Icon on the OWA Toolbar, and it should underline the misspelt words.
If the email is ready to be sent, you can also click the Send button. If there are any spelling mistakes, you should receive the following message:
Follow the directions given to fix the misspellings.
It is important to remember as an employee of the State of Connecticut the email you redirect should not be to a personal account. A Freedom of Information (FOI) request will compromise your private information. For this reason create an account specifically for mail forwarding that will separate personal from University.
Using either Outlook Web Access or the full version of Outlook, create a new contact. The new contact should contain the email address you want to forward mail to. In this example, mail is forwarded to a gmail account.
Log onto OutlookWebAccess
Open a web browser and browse to https://mail.business.uconn.edu/owa
Click on Options
Select Forward your mail using Inbox rules found in the Shortcuts to other things you can do section
Click on New.. to define a rule to enable forwarding
In the Apply this rule... *When the message arrives, and: field
And select "My name is in the To of Cc box" from the available options
In the Do the following: field select "Redirect the message to..." from the available options
Click on Select One...
or
Click on Suggested Contacts. If you have ever sent an email from Outlook to your desired email forwarding address select it from that list. Or type the desired email address in the To ->
Click OK
Click the Save to implement the changes
Send a test message to verify the forwarding rule is working correctly
Right click on the user's Mailbox
Scroll to Properties for "Mailbox – Username"
Click on the Folder Size... button
The Total Size (including subfolders) should be less than 100 Mb or 102400 Kb
If space needs to be cleared, ask the end user if the RSS Feeds (news readers) can be cleared to make space.
If additional space is needed please create Personal Folders (*.PST) and save them in D:\Data\Outlook
For additional information, visit What to Do When an Email Account is Over Quota .
Word Button > Send > E-mail
Note: This will only send the document as an attachment.
Copy and Paste all text and graphics from a Microsoft Word Document to a Microsoft Outlook Email
In Microsoft Word, highlight all text and/or images, right-click, select Copy
In Outlook, create a new message, right-click, and choose the Paste Option that best suits your needs.
If you want all the formatting to remain the same as in Word, select Keep Source Formatting (K)
Start a new email
Select the Format Tab
Select the Options Tab
Below the Options Tab, Click on the HTML button.
HTML (web page) formatting is required so that photos will appear in the body of the e-mail message.
Select the Insert Tab
Click the Picture button on the ribbon bar
Repeat the Insert photo step above until you have completed inserting the photos
IMPORTANT! Avoid cutting and pasting photographs into an e-mail. Inserting a photograph through any other means than insert picture, described above, will likely result in an email with NO photos.
When you are done press the Send button.
Go to the "Tools" menu and select "Options." Click the "Mail Formats" tab and then click "Stationary and Fonts."
Look for the "Display Font" heading on the "Personal Stationary" tab and increase the size the size of the font by selecting a larger number. This will increase the text size for all plain text incoming email. However, it will not increase the text size of incoming HTML emails.
Set the option to read all incoming email as plain text if it is necessary to increase the text size of all incoming emails. To do this, go to "Tools", then click on "Options," then look for the button that says "Email Options" and click "Read all Standard Mail as Plain Text."
Note: This function is VERY time sensitive and must be done as soon as the error is identified.
Click on Sent Items.
Find the message you want recalled and double-click to open it.
Go to the Ribbon.
In the Actions section, click Other Actions
Select Recall This Message.
Select Delete unread copies of this message.
To be notified about the success of the recall, check the Tell me if recall succeeds or fails for each recipient checkbox.
Click OK.
If the operation was successful you will receive an email minutes later for verification:
"Your message
To: John Dough
Subject: recalled message
Sent: 4/27/2010 11:00 AM
was recalled successfully on 4/27/2010 11:00 AM."
Open Outlook and select your inbox.
Select Tools from the Toolbar and scroll to Options...
Click on the Junk E-mail... button
Increase the level of junk e-mail protection you want from Low to High
Select the International Tab.
Click on the Blocked Top-Level Domain List...
If you are certain that you will NOT be receiving international e-mails written in English or any other language click on the Select All button, then the OK button to apply your preferences. (Not Recommended)
Click on the Blocked Encodings List... button.
Click on the Select All button to block Encodings List. This will block all unrecognized characters. Click the OK button to apply your changes.
The best solution for resolving email quota issues is to create an email archive. This will allow you to move mail from a busy inbox to a local store to free up server space.
Open Outlook.
Select Tools from Outlook Toolbar and scroll to Account Settings...
Select the Date Files Tab.
Click on the Add... button.
Select Office Outlook Personal Folders File(.pst) .
Click the OK button.
Choose an appropriate location for your Personal Folder and name for the Archive.
D:\Data is the recommended file location.
It is recommended that the File name and the Name: be the same (excluding ".pst") this will make finding the mail archive easier for Tech support.
Click the Close Button to complete the process.
The Archive will be below your Mailbox
By Right Clicking on the name of the Archive you can select the option to Add New Folder to organize your mail.
To move mail click and drag mail from your inbox to your newly create mail archive.
The error message that is displayed is: Can't Create file: filename.xxx. Right-Click the folder you want to create the file in, and then click properties on the shortcut menu to check your permissions for the folder
When Outlook opens an attachment, it saves it to a temporary folder. When it opens an attachment that has the same name as a file that is already in that temp folder, it incrementally appends a number to the name. Once it reaches (99), Outlook will no longer open attachments of that name.
Here is the website that has the instructions that helped me figure out where your files were.
http://www.intelliadmin.com/blog/2007/08/cant-create-file-outlook-error-and-the.html
The key is to go into the registry and find the temp filepath, which is listed at the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Outlook\Security, under the key OutlookSecureTempFolder
COPY AND PASTE THAT FILENAME INTO WINDOWS EXPLORER. If you try to navigate to that path it will be hidden and you will not see it listed.
An example path would be:
C:\Documents and Settings\nmoore2\Local Settings\Temporary Internet Files\OLK4
Once you delete the files, you will be able to open these files again.
When you add a delegate to your Outlook 2007 account, you share selected folders and give permission to take specific actions on your behalf.
On the Tools menu, click Options.
In the Options dialog box, click My Delegates only, but send a copy of meeting requests and responses to me (recommended).
You can modify permissions for a delegate at any time.
On the Tools menu, click Options.
On the Delegates tab, click the delegate, and then click Permissions.
In the Delegate Permissions dialog box, in the Outlook item lists, select the desired permission level, and then click OK.
In the Options dialog box, click OK.
When you need to remove Outlook 2007 access for your delegate, use the following procedure.
On the Tools menu, click Options.
Click the Delegates tab, and then click the delegate.
Click Remove, and then click OK.
Open a Delegated Outlook 2007 Folder
If you have been given delegate access, you can open a delegated Outlook 2007 folder from your own Outlook 2007 account.
In the Folder Type list, click the delegated folder, and then click OK.
*Use side-by-side calendars to best manage your own calendar and a delegated calendar at the same time. The owner of each calendar is identified to eliminate possible confusion.
* To maintain access to your own Outlook 2007 folder, as well as to the delegated folder, right-click the specified folder, and then click Open in New Window. A second instance of the folder appears. Apply the instructions above to this second window. Your original folder will be available while the delegated folder opens in the second window.
On the File menu, point to Open, and then click Other Users Folder.
Type the full name or alias of the person who granted you delegate access. Click Name to browse the global address list for the name. The folder opens with your manager's name replacing your own.
Open Outlook 2007, so you are viewing your Inbox
Select Tools, scroll to Options...
Select the Mail Setup tab click on the E-mail Accounts . . . button
Select the E-mail tab click on the Change... button
No changes are needed here. Click on the More Settings... button
Select the Advanced Tab
In the Mailboxes section, click on the Add... to Add mailboxes to Openthese additional mailboxes:
Type in the account name and click the OK . . . button
Locate the appropriate mailbox, if more than one is present, select it and click the OK button.
Add additional Mailboxes by following the steps above or click OK to continue.
Click Next
Click Finish.
Click Close.
The mailbox, calendar and any other services you have access to will be displayed below your Mail Folders.
If you are unable to view any content please make sure the rights you requested have been appropriately assigned.
These instructions will allow the temporary viewing of another user's inbox and calendar for only your current Outlook session. When you close out of Outlook, these setting will reset. To add another user's folders to your email account long-term, view How to Add Another User's Folder to Your Outlook Account: Long-Term.
Open Outlook 2007, From the Main Outlook window (your inbox) select File, scroll to Open
Select Other User's Folder...
To make sure the correct calendar is opened type in the account name and click the Name . . . button
A list of accounts will be displayed, select the account from the list or the entry will automatically underline to indicate that the account is valid.
Click on the OK button to complete the addition.
Open Outlook 2007, From the Main Outlook window (your inbox) select File, scroll to Open
Select Other User's Folder...
Type in the account name and click the Name . . . button
In the Folder type field scroll to and select Inbox
Click on the OK button to complete the addition.
The folder specified will open in a NEW Outlook Window. If you close the window you will have to repeat the process above.
If you close Outlook by using the "X" in the top right of your Inbox, all mail folders will close and when Outlook is opened again, all other's folders will open as well.
If the folder does not display, it is because the required permissions have not been granted. It may be easier to work with the others who have account access. They can grant you access or send a work order to the Service Desk, and a Mail Administrator will work with you get get the correct permissions applied.
或是邮件反馈可也:
askdama[AT]googlegroups.com
订阅 substack 体验古早写作:
关注公众号, 持续获得相关各种嗯哼: